Metalaire

Dynamix Hydro Systems has been supplying quality, efficient and affordable pumping solutions for more than 60 years. Dynamix offers one of the broadest ranges in the industry so you’re sure to find the perfect fit for your project. When you choose Dynamix pumps you’re partnering with a company who stands behind everything they make.

Energy International is the Authorized Distributor for Dynamix Pumps in the Middle East. For more information on Dynamix products contact your Energy International representative.

Dynamix Representative

Mohammad Tbeishat
T: +962-6-556-1718
M:+962-79-800-7279
mohammad.tbeishat@energyintl.com

Dynamix Products

DXCR Vertical Multistage Pumps

DXCR

Non-self-priming, vertical multistage centrifugal pumps. Pumps are suitable for a wide range of applications from pumping potable water to pumping chemicals
– Flow rate: 0.3 to 120 m³/h (1.32 – 528.3 gpm)
– Head up: Up to 320 meters (1050 ft.)
– Ambient temperature: Max. + 40°C (1040F)
– Equipped with a maintenance-free mechanical, bellow-type shaft seal
– Available in various sizes with various numbers of stages
– Available in various materials including cast iron, stainless steel 304 and stainless steel 316

DXCC Monoblock Centrifugal Pumps

Monoblock

Non self-priming, horizontal, single-stage, centrifugal volute
casing pump with axial suction and radial discharge
– Discharge range from 3 – 660 m3/hr
– Head range from 4 – 158 meters.
– Motor ratings from 0.37 to 132 kW
– Long coupled with TEFC squirrel cage induction motors.
– EFF2 motors standard. EFF1 motors available on request.
– Available with gland packing or mechanical seal
– Available with fabricated steel base framing
– Impellers are dynamically balanced to grade 6.3 of ISO 1940

DXHC Horizontal Split Case Pumps

HSC

Horizontal split case pumps with a horizontal pump shaft. The DXHC range is available in single-stage and two-stage models
– Discharge range from 20 – 1320 m3/h (88 to 5812 gpm)
– Head range from 4 – 88 m (13 to 518 ft.)
– Motor ratings from 3 to 160 kW
– EFF2 motors are standard. EFF1 motors are available on request.
– Available with gland packing and mechanical shaft seal
– Impellers dynamically balanced to grade 6.3 of ISO 1940
– Pumps can be supplied as a complete unit with motor, coupling, coupling guard and fabricated steel base frame
– Construction enables removal and dismantling of the internal parts without disturbing the motor and pipe work

DXCI Submersible Pumps

Subs

Cast Iron Submersible Pumps are available from 4” to 12 “
– Designed using computational fluid dynamics to ensure maximum efficiency
– Designed using materials that will work with sand found in bore wells
– Journal bearings and impeller wear rings are made of nitrite rubber to ensure peak performance and long life
– All pumps provided with upthrust bearing
– Low friction, non-return valve reduces water hammer when stopped
– Impellers are individually balanced to grade 6.3 ISO 1940
– Shaft is protected by stainless steel sleeves which are easily replaced
– All components are machined using state-of-the-art CNC machines to ensure dimensional accuracy

DXBS Bare Shaft Centrifugal Pumps

Bare Shaft

Non-self-priming, horizontal, single-stage, centrifugal volute
casing pump with axial suction and radial discharge
– Discharge range from 3 – 660 m3/hr
– Head range from 4 – 158 meters
– Motor ratings from 0.37 to 132 kW
– EFF2 motors standard. EFF1 motors available on request.
– Available with gland packing or mechanical seal
– Available with fabricated steel base framing
– Impellers are dynamically balanced to grade 6.3 of ISO 1940
– Pull-out back design allows the removal of the motor, bearing bracket and impeller for servicing without dismantling pump

DXVI Vertical Inline Pumps

SC1

Non-self-priming, single-stage, vertical inline, close-coupled type centrifugal pumps having radial suction and radial discharge port
– Discharge range up to 600 m3/h
– Head range up to 150 meters
– Motor ratings up to 132 kW.
– Offer floor space savings versus end suction and horizontal split case pumps
– Inline construction makes pipework easier. Pipe and fittings offer adequate support for most installations
– Large inlet passages have flow straightening vanes to provide excellent suction performance and quiet operation
– EFF2 motors standard – EFF1 motors available on request

DXSS Stainless Steel Submersible Pumps

SS Subs

Stainless Steel Submersible Pumps are available from 4” to 10 “
– Pumps are fabricated from AISI 304 stainless steel
– Pumps equipped with water lubricated rubber wear rings and bush bearings
– State-of-the-art computerized design for higher efficiency
– Stainless steel sheet construction offers a very low
– coefficient of friction reducing energy consumption
– Pump can withstand harsh, abrasive and corrosive environments
– All pumps equipped with a non-turn valve to prevent back flow and reduce water hammer when stopped

Drainage & Sewage Pumps

Sewage

Dynamix offers a complete line of sewage and drainage pumps suitable for a wide range of applications
– DXAP Drainage Pumps – 0.5 to 3.0 HP
– DXAS Heavy Duty Construction Pumps – 1.5 to 15 HP
– DXBP Stainless Steel Submersible Effluent Vortex Pumps
– DXFP Sewage Pumps 1.0 to 3.0 HP
– DXGP Grinder Pumps 1.0 to 5.0 HP
– DXHP Heavy Duty Sewage Pumps 5.0 to 30.0 HP
– DXLP Large Volume Water Pumps 3.0 to 15.0 HP
– DXMP Composite Case Submersible Drainage Pumps
– DXSP Cast Iron Submersible Drainage Pumps

Submersible Motors

Sub Motors

– Oil and Water Filled from 3” to 10” in cast iron and stainless steel
– Available in 50 Hz rated at 2900 rpm and 60 Hz rated at 3450 rpm
– All components are manufactured with superior quality materials and precision machined

Pressure Booster Sets

Booster

– Dynamix Aquapack – Booster Sets with 2 to 4 DXCR Pumps
– Subpack – Booster Sets with 2 to 4 Submersible Pump
– Hydro Series- Compact, Automatic Pressure Booster Pumps.
– DXPD Home Pressure Booster Pumps

Solar-Powered Pumps

Solar

– Solar Centrifugal Monoblock Pumps
– Solar Stainless Steel Submersible Bore Well Pumps

Dynamix Fire Fighting Pumpsets

Dynamix Hydro Systems Fire Fighting Pumpsets are designed with your safety in mind. Manufactured from the finest materials and crafted using the latest state-of-the-art technologies, Dynamix pumpsets protect your investments and insure the safety of your building’s occupants.

All Dymanix fire pumpsets meet or exceed the requirements set by NFPA 20. They are available in Horizontal Split Case and End Suction variants with your choice of electric or diesel power. Dynamix fire pumpsets offer discharge ranges from 500 to 3,000 gpm and head ranges from 40 to 230 psi. All main components, with the exception of the fuel tank and common controller, are mounted on a common base frame offering a compact, efficient solution. Dynamix can also supply a complete packaged system with all required accessories ready for site installation.

XBSD

DXSD Series End Suction
Diesel Engine Driven, Fire Pumpset

DXCD

DXCD Series Horizontal Split Case
Diesel Engine Driven, Fire Pumpset

XSE

DXSE Series End Suction
Electric Motor Driven, Fire Pumpset

DXCE

DXCE Series Horizontal Split Case
Electric Motor Driven, Fire Pumpset

Domestic and Residential Pumps

DXVMT

DXVMT Two-Stage Centrifugal Pump

DXVMJ

DXVMJ Self-Priming Jet Pump

DXVM

DXVM Centrifugal Pump

DXSM

DXSM Non Self-Priming Pump

DXLSE

DXLSE Well Submersible Pump

DXFHC

DXFHC Horizontal Multi-Stage Centrifugal Pump

DXMDH

DXMDH Self-Priming Monoblock Pump

DXMH

DXMH, DXMHN Horizontal Multi-Stage End-Suction Pump

DXMFX

DXMFX Horizontal Single-Stage Centrifugal Pump

DXVMJS

DXVMJS Self-Priming Centrifugal Pump

DXLPSH

DXLPSH100/DXLPSV300 Auto Boost Electronic Pressure Regulator

DXVAS

DXVAS/DXVFS Garden Submersible Pump