Metalaire

Metalaire offers a complete line of quality air distribution products and air terminal units. MetalAire is dedicated to providing the highest level of service in the HVAC industry. Since our inception in 1947, Metalaire has grown to become a leading worldwide supplier of commercial air distribution products. The Metalaire product offering includes grilles, registers, diffusers, and air terminals units. Metalaire has a broad network of representatives knowledgeable in all phases of HVAC design and selection. MetalAire products are sold throughout the United States and around the world.

Energy International is the Authorized Distributor for Metalaire products in the Middle East. For more information on Metalaire products contact your local representative.

In Riyadh, KSA

Mazen Sheet
T:+966-11-476-2755
M:+966-56-424-8924
msheet@energyintl.com

In Jeddah, KSA

Fadi Fakih
T:+966-12-662-9368
M:+966-53-428-6827
fadi.fakih@energyintl.com

In Dammam, KSA & Bahrain

Marwan Mroueh
T:+966-13-834-7837‬
M:+966-53-030-8349
marwan.mroueh@energyintl.com

In The UAE & Oman

Khalil Bilan
T:+971-6-534-3477
M:+971-50-818-5351
k.bilan@energyintl.com

In Lebanon

Bechara Saab
T:+961-5-450-610
M:+961-3-305-816
bsaab@energyintl.com

In Jordan

Fadi Rashid
T:+962-6-556-1718
M:+962-79-7565677
fadi.rashid@energyintl.com

In Qatar

Ammar Assi
T:+974-44-58-1126
M:+974-55-50-6143
aassi@energyintl.com

Metalaire Products

Single Duct Air Terminal Units

Single duct air terminal units are designed to regulate the flow of conditioned air in a distribution system. They are available in wa wide range of standard control sequences and work equally well in constant and variable volume systems. Single duct air terminals can be specified with hot water coils, electric heat, sound attenuators, access panels and other optional accessories. They offer a low leakage single blade damper and are available in both pressure dependent and pressure independent applications. Single duct air terminal units are recommended for use in duct systems with a static pressure up to 4” w.g.

TH-500

TH500

Available sizes from 4” – 16” round, 20” x 16” rectangular

Available ECO option provides ultra-low leakage with high efficiency in sizes 4” – 16”

With the ECO option, each unit is manufactured and tested for both casing and damper leakage. An optional certified leakage test label is available

TL -500

TL500

Available in sizes 4” – 10” round and 12”, 14” and 16” flat oval

The maximum height of the TL-500 unit is 12.5”

Constant Volume Air Terminal Units

Constant volume air terminal units provide cooling through the primary air valve. The primary air valve controls the volume of air that is discharged into the terminal unit. The cooled air is delivered to the space through the terminal’s fan. When heating is required, the unit provides plenum air that is drawn through the induction inlet. The fan in a constant volume (series) fan powered terminal runs continuously during occupied hours.

An optional ECM motor and controls are available on all models.

FCI-600

FCI600

The model FCI-600 fan powered terminal unit is designed to provide superior comfort to zones with both heating and cooling requirements

Available in 6 case sizes with a wide range of primary inlet sizes offering the flexibility to meet both capacity and sound requirements

FCL-600 Low Profile

FCL600

The model FCL-600 low profile fan powered terminal unit is designed to provide superior comfort control in applications with restricted heights. The FCL-600 also can be selected for projects with limited heights in the ceiling plenum

Available in 2 case sizes offering the flexibility to meet both your air flow capacity and sound requirements

.

FCQ-700

FCQ600

The model FCQ-700 has been engineered to provide noise levels that are superior in the industry

All case sizes include exclusively tuned inlet and discharge attenuators. The attenuator adds length, not width, providing easier installation and access

The unique Energy Saving 4-piece construction allows for fewer seams, reducing leakage. Every unit includes top and bottom rigid access panels, which allows the unit to be flipped upside down eliminating left hand/right hand issues in the field.

Variable Volume Air Terminal Units

The variable volume air terminal units are designed to provide superior comfort control to zones with heating and cooling requirements. The fan in a variable volume (parallel) terminal unit runs only upon requirements for heat. The primary air valve controls the volume of cooled air that is discharged into the space. In this type of terminal unit, the primary air does not pass through the fan. When heating is required, the terminal provides plenum air that is drawn through the induction inlet.

FVI-500

FVI500

The model FVI-500 is available in 7 case sizes with a wide range of primary inlet sizes offering the flexibility to meet both airflow capacity and sound requirements

An optional ECM motor and control is available for improved energy efficiency and control

FVL-600 Low Profile

FVL600

The model FVI-500 is available in 7 case sizes with a wide range of primary inlet sizes offering the flexibility to meet both airflow capacity and sound requirements

An optional ECM motor and control is available for improved energy efficiency and control

Dual Duct Air Terminal Units

Dual duct air terminal units are designed to regulate the flow of conditioned air in dual duct air distribution systems. In a dual duct system, both heated and cooled air are provided to the terminal and mixed to supply the desired discharge temperature. The dual duct units are available in both pressure dependent and pressure independent applications. They are recommended for use in duct systems with static pressure up to 4” w.g. The units feature a single blade damper in both heating and cooling inlets.

DH-500

DH500

The model DH-500 high performance dual duct unit has been engineered to provide a 1:30 mixing ration- the highest in the industry

Available in 4” – 16” round inlet sizes

DD-500

DD500

The model DD-500 was designed for both heated and cooled air to be provided to the terminal and mixed in downstream duct work (by others) to provide the desired discharge temperature

Bypass Air Terminal Units

BP-600

BP600

The model BP-600 uses a primary air damper working in concert with a bypass port damper.

The model SR-500 is a retrofit terminal designed to fit existing low pressure/low velocity square or rectangular duct systems. They can also be used in dust systems with static pressure up to 4” w.g.

Retrofit Terminals

RA-500

RA500

The model RA-500 retrofit assembly is customized to slip into existing mechanically regulated single or dual duct terminals to convert existing constant volume operation

RA assemblies are currently available to fit most of the competitive terminals manufactured from the 1960s to the 1980s. In most applications, units are installed by removing existing volume regulators and inserting the RA valve without disrupting existing ductwork

RT-500

RT500

The model RT-500 is designed to regulate the flow of conditioned air in single or dual duct air distribution systems and is also used to provide positive or negative pressures in laboratory hood applications. The model RT-500 is primarily used to convert mechanically regulated constant volume single or dual duct air terminals to more efficient variable volume air terminals without disrupting total system operation

Metalaire’s air terminal units are available with a wide range of control options and accessories to meet your design requirements. We can provide pneumatic, electric, analog electronic, factory provided DDC controls or DDC (by others) factory mounted

The RT-500 is easily installed into existing ductwork in front of an existing air terminal

Metalaire offers both LONMARK and BACnet ready DDC controls shipped to your project, addressed and ready to install within the shortest standard lead times in the industry.

A wide range of room sensors, cabling and laptop connection hardware is also available.