Moffitt

Moffitt Corporation designs, manufactures and installs industrial ventilation equipment to serve the heavy commercial and industrial facilities in the U.S. and around the world. The Moffitt mission is to help contractors, engineers and facility owners find the best ventilation solutions for their facility. Moffitt’s extensive line of products, includes natural ventilation products like the MoffittVent, Labyrinth, GreenRoo, exhaust fans, wall fans, heaters and more.

Energy International is the Authorized Distributor for Moffitt Products in the Middle East. For more information on Moffitt Products contact your local representative.
In Riyadh, KSA

Majd Kanaan
T:+966 11 476 2755
M:+966 55 880 6901
majd.kanaan@energyintl.com

In Jeddah, KSA

Fadi Fakih
T:+966126629368
M:+966-534286827
fadi.fakih@energyintl.com

In Dammam, KSA & Bahrain

Marwan Mroueh
T:+966 13 834 7837‬
M:+966 53 030 8349
marwan.mroueh@energyintl.com

In The UAE & Oman

Khalil Bilan
T:+971 6 534 3477
M:+971 50 818 5351
kbilan@energyintl.com

In Lebanon

Bechara Saab
T:+961 5 450 610
M:+961 3 305816
bsaab@energyintl.com

In Jordan

Fadi Rashid
T:+962-6-556-1718
M:+962-79-7565677
fadi.rashid@energyintl.com

In Qatar

Ziad Khaled
T: +974 44642316
M: +974 55230535
ziad.khaled@energyintl.com

Natural Ventilation

Natural Ventilation is the evacuation of hot air and fumes directly through an opening in the ceiling. The opening is covered by a weatherproof ventilator, and air-flow is supported by fresh intake air at the floor level. These natural ventilation systems create a cooler and more comfortable building with no operating costs or energy consumption.

Labyrinth

Labyrinth

The Labyrinth uses aerodynamically designed baffles and louvers to provide persistent and consistent weatherproof ventilation.

  • Aluminum Construction
  • Lightweight – good for hoisting and installation
  • Low profile – lessens the impact of the wind on the roof
  • Compact Shipping
Ridgepac
  • The RidgePac is designed to be mounted on the ridge of the building to ensure maximum warm air exhaust. This natural ventilator is highly efficient, aesthetically pleasing, and a good value with low-cost per CFM.

ridgepac

thermoflow

Thermoflow
  • The Thermoflow low-profile natural ventilator is very effective at evacuating large amounts of warm air and smoke. It provides superior air-flow capacity levels and simplified installation with minimal roof load and wind load.
GreenRoo Turbine Vent

Made of marine grade, light gauge aluminum, the GreenRoo turbine vent spins easily in the wind offering air movement at a greater volume and rate.

  • Available 12”, 24” & 36” throat sizes
  • Capacities 500 – 10,000 CFM
  • Corrosion Resistant Lightweight Aluminum
  • Stainless Steel Shaft with Anodized Steel Bearing Support Spider
  • Vertical turbine blades
  • Varipitch adjustable throat up to 22° slope

greenroo

lightstream

Lightstream
  • The LightStream hinged window is suitable for commercial to industrial applications. It mounts low on the wall for cool, fresh air intake, or up high to allow for warm air to exhaust. When it is closed it provides ample natural daylighting through its translucent panels.
Apollo

The Apollo offers day-to-day natural ventilation and daylighting for heavy commercial to industrial facilities. It’s dual opening flaps let warm air flow naturally out of the building.

  • Aluminum Construction
  • Lightweight – good for hoisting and installation
  • Low profile – lessens impact of the wind on the roof
  • Assembly on Ground or In-Place
  • Compact Shipping
  • BIM model

Apollo

econovent

Econovent

Econovent’s low-profile silhouette looks good on any roof top. It is available in stainless steel, galvanized steel or aluminum.

  • 1/2″ Mesh galvanized bird screen
  • Hoods on larger units reinforced with interior structural steel supports
  • Vertical base seams are continuously-welded on larger units and spot-welded on smaller ones
  • Integral curb cap
  • Mill finish
SG Vent
  • The SG Vent is simple but versatile and conforms to the Army Corp of Engineers Bulletin CE 220.09 for gravity ventilators
  • It is very reliable and is compatible with a long list of ventilation accessories

sgvent

Natural Smoke & Heat Ventilation

In the event of a fire, Natural Smoke Ventilation & Heat Ventilation can help save equipment, the building, and most importantly, workers’ lives. A fusible link allows the vent to open automatically in the event of a fire; allowing the smoke to escape the building. Some of these devices are not used for general building ventilation. Learn more about natural ventilation for passive smoke ventilation and climate control.

firelight

Firelight

The Firelight is a natural casement roof ventilator, suitable for natural smoke control. It has high aerodynamic, acoustic and thermal performance, providing extract ventilation for most kinds of industrial and commercial buildings.

  • Width: 1000mm to 2500mm in width (1mm increments)
  • Length: 1000mm to 3000mm (1 mm increments)
  • Flap Types: Glazed
  • Construction: All components of the base and flap are manufactured from EN AW 6060-T66 aluminum alloy
  • Frames of both the base and flap are thermally broken
Kameleon

The Kameleon is a thermally broken, glazed natural casement ventilator suitable both for day-to-day and smoke ventilation through the façade. Both flap and base frames have thermal breaks.

  • Overall Frame Depth: 47 mm
  • Profile Depth: 76mm. Large flap frame: 99mm wide, Small flap frame: 70mm wide
  • Materials: Aluminum alloy, with stainless steel fixings
  • Mill finish (std.), Polycarbonate, Polyester powder paint to a RAL color (std. 75 mu), Anodized (std. 20 mu)
  • Controls: Pneumatic or Electric Linear Drives

kameleon

firex

Firex

Firex is an automatic heat and smoke vent designed to restrict fire from spreading by extracting heat and smoke.

  • Closed Height: 15 ¾ inches
  • Opening width: 4 to 6 feet
  • Opening length range: 4 – 9 feet
  • Venting area range: 16 ft2 – 54 ft2
  • Wind uplift: 40 lbs/ft2 (pounds per square feet)
  • Net weight range: 345 pounds – 590 pounds
  • Operators: Automatic or Manual
  • Lids: Aluminum

Natural Cooling

Natural Cooling is a low-energy, low-cost alternative for large commercial and industrial facilities. Utilizing evaporative, adiabatic technology, a Natural Cooling system uses water to lower the building’s air temperature. It is a more effective and efficient alternative to air conditioning.

coolstream

Coolstream

Coolstream cools outdoor supply air 5° to 15°F below ambient conditions through natural evaporative cooling.

  • Aluminum Construction
  • Direct drive variable speed motors
  • High efficiency cellulose medium
  • Polypropylene tubing
  • Roof or wall mounting available
  • BIM Model
Pressurestream

The PressureStream is designed for wall or roof mounting – supply or exhaust.

  • Fan Diamater: 36”
  • CFM: 20,000
  • 3 HP, 1160 RPM 230/460/3 Direct drive motor
  • Blades: modern, fiber reinforced thermoplastic with helical twist and airfoil shape
  • Propeller Hubs: High-strength die-cast aluminum
  • Housings: Aluminum

The PressureStream can be curb mounted either in the sidewall or on the roof.

  • Roof Mount: Hood OD: 88”, Curb OD: 46”, Average Weight: 800 lbs
  • Wall Mount: Housing Depth: 44”, Housing OD: 42.5”, Average Weight: 450 lbs

pressurestream

Natural Intake

Sufficient supply air is the key to having an effective natural ventilation system. Natural Intake, through wall louvers and side-wall openings, help push the warm air through the building and create more pleasant conditions for the building’s occupants.

ecostream

Ecostream louver 90 degrees
  • EcoStream’s heavy-duty construction ensures that it can withstand the harshest conditions
  • Louvers are fabricated from galvanized steel or extruded aluminum with optional finishes and ship in factory assembled panel sizes
  • The 90° wall louver line includes models with full-opening adjustable blades designed for maximum airflow
Ecostream louver 45 degrees
  • EcoStream’s heavy-duty construction ensures they can withstand the harshest conditions
  • Louvers are fabricated from galvanized steel or extruded aluminum with optional finishes and ship in factory assembled panel sizes
  • The 45° wall louver line includes models with fixed or adjustable blades with drainable or non-drainable configurations

ecostream

fco

Moffitt FCO Louver
  • The FCO’s translucent blades act both as an airflow device and a daylighting device
  • Frames are constructed of lightweight and corrosion resistant aluminum
  • The louver is normally electrically actuated, but can be manual or pneumatic. Each unit ships in factory assembled, maximum panel sizes
Ecostream Combination louver
  • Combination louvers are used when a fixed louver is wanted on the exterior face of a facility for aesthetic purposes. Drainable and non-drainable styles are available
  • Each unit has a fixed front blade and adjustable rear blade

combo

lightstream

Lightstream
  • The LightStream hinged window is suitable for everything from commercial to industrial applications
  • When mounted low on the wall it allows cool, fresh air to be drawn into the space
  • When mounted up high it allows warm air to exhaust
  • When the unit is closed it provides ample daylighting through its translucent panels

Heated Ventilation

HT380

HT380 Direct Fired Heater
  • The HT380 Direct Fired heater is used to introduce high volumes of heated make-up air into a building
  • Units are designed for outdoor or indoor mounting and can be provided in either horizontal or vertical mounting arrangements
HT180 Indirect Fired Heater
  • The HT180 Indirect Fired Heater utilizes the Air Destratification principle to provide continuous hot air circulation to maintain uniform air temperature throughout a building

HT180

Powered Ventilation

roof-fan

Hooded Roof Fan

Hooded Roof Fans are some of our most popular and flexible products.

  • Sizes: 24″ – 120″ – CFM Range:5,000 – 100,000 +
  • Statically and Dynamically Balanced Aluminum Propeller
  • All Galvanized Steel Construction, Low Profile
  • Variable Pitch Drives Standard Through 3 HP, sized for a Minimum 150% of Drive HP
  • Integral Deep Spun Inlet. Removable Panel for Easy Damper Access
  • Open drip-proof motor. Heavy Duty 200,000 Hour Rated Pillow Block Bearings
  • Bird screen: 1/2″ mesh, 19 ga. galvanized steel
Wall Fan

Axial wall fans are ideal for commercial and industrial building ventilation.

  • Size/Diameter: 12″ – 120″ – CFM Range: 500 – 100,000 +
  • Belt- and Direct- Drive: Direct Drive RPMs of 1800, 1200, 900, or 700
  • All Galvanized Steel Construction
  • Propeller: Aluminum
  • Motor: Open Drip Proof

wall-fan

UB3100

Upblast fans UB3100 – 3300

Designed for exhausting building air to provide general ventilation to hot, stagnant areas.

  • Sizes: 24″ – 120″ – CFM Range:5,000 – 100,000 +
  • Statically and Dynamically Balanced Aluminum Propeller
  • All Galvanized Steel Construction, Low Profile
  • Variable Pitch Drives Standard Through 3 HP, sized for a Minimum 150% of Drive HP
  • Integral Deep Spun Inlet. Removable Panel for Easy Damper Access
  • Open drip-proof motor. Heavy Duty 200,000 Hour Rated Pillow Block Bearings
  • Bird screen: 1/2″ mesh, 19 ga. galvanized steel
Upblast Fan – UB3400

Designed for standard duty roof mount applications for exhausting building air to provide general ventilation of hot, stagnant areas.

  • Sizes: 24″ – 120″ – CFM Range:5,000 – 100,000 +
  • Statically and Dynamically Balanced Aluminum Propeller
  • All Galvanized Steel Construction, Low Profile
  • Variable Pitch Drives Standard Through 3 HP, sized for a Minimum 150% of Drive HP
  • Integral Deep Spun Inlet. Removable Panel for Easy Damper Access
  • Open drip-proof motor. Heavy Duty 200,000 Hour Rated Pillow Block Bearings
  • Bird screen: 1/2″ mesh, 19 ga. galvanized steel

UB3400

UB3700

Upblast Fan – UB3700

Designed for standard duty roof mount applications for exhausting building air to provide general ventilation of hot, stagnant areas.

  • Sizes: 24″ – 120″ – CFM Range:5,000 – 100,000 +
  • Statically and Dynamically Balanced Aluminum Propeller
  • All Galvanized Steel Construction, Low Profile
  • Variable Pitch Drives Standard Through 3 HP, sized for a Minimum 150% of Drive HP
  • Integral Deep Spun Inlet. Removable Panel for Easy Damper Access
  • Open drip-proof motor. Heavy Duty 200,000 Hour Rated Pillow Block Bearings
  • Bird screen: 1/2″ mesh, 19 ga. galvanized steel
Tube Axial Fan TA2300

The TA2300 Tube Axial Fans are high capacity belt drive tube axial fans rated from 900 to 75,490 CFM.

  • Size: 12″ – 60″ propeller diameters, 12 intermittent sizes
  • 900 – 75,490 CFM in static pressure rated for applications up to to 1 ½” w.g
  • Motor and drives are located outside of the airstream
  • Epoxy Coating
  • Continuously welded and epoxy painted steel housing
  • AMCA Air & Sound Certified

TA2300

TA2000

Tube Axial Fan TA1000

Designed for applications where higher static pressures are required.

  • Direct Drive: Size 12″ – 48″ – Belt Drive: Size 12″ – 60″
  • CFM Range: 2,000 – 120,000 +
  • Heavy gauge hot rolled steel construction
  • Flanges – Angles rings integrally rolled or welded to tube
  • All Welded Support Structure
  • Cast aluminum propeller, statically and dynamically Balanced
  • Variable Pitch Drives Standard thru 3 HP
  • Heavy Duty 200,000 Hour Rated Pillow Block Bearings
  • Adjustable motor base for belt tensioning